2006-2008 Dodge Ram Tail Light Buyers Guide

Installation tools needed:

Phillips screw driver, pocket flat tip screwdriver, 1/4" drive ratchet, T20 torx socket, and handy remover.

Tail light Installation:

1. Open tailgate

2. Remove two screws holding the tail light in place.

3. Use the handy remover to remove tail light

4. Gently pull the tail light forward and remove the tail light harness

5. Remove tail light

6. Remove bulbs from tail light

7. Remove tail light harness from the new tail light

8. Remove bulbs from vehicle harness and install them on to new tail light harnesses

9. Reattach tail light harnesses to new tail lights

10. Attach vehicle harnesses to new tail light harnesses

11. Gently push new tail light into place making sure clips are fastened

12. Replace two screws holding tail light in place

13. Close tailgate

14. Turn on truck and test if all functions are working properly

15. Enjoy new tail lights